If you have a horizontal slab of concrete, we can cut it. Concrete slabs can include reinforced concrete, precast concrete, and other structural materials. Concrete slab cutting is commonly used to provide extended joints, openings for drains and drains, elevators, stairs, machine pads, and demolition purposes. We can cut to any depth on the floor or suspended slab. If you are unsure what kind of material your concrete slab is made of, we suggest you start with some basic patterns.
Wall
When your concrete surface is vertical or at an angle, we use a saw to open the wall. Wall cutting is suitable for: removing doors, windows, vaults, silos, chests, foundations, drains, and large diameter pipes, or any part or all of an existing wall. Whether you have poured new concrete or wanted to bring some new life to the existing structure, we can cut into any depth of the wall.
The wire
We use wire saws if any work requires deep cutting or special cutting. Wire saws allow for greater flexibility in cutting. If you need to cut deeper than 21 inches, or if you need to cut weird pieces of concrete, wire saws are the way to go.
Concrete coring and drilling
Concrete coring and drilling are often used when you need access to electrical, plumbing, heating, gutter, and sprinkler installations. We can drill holes at any angle of 1⁄4 “to 24” diameter and at a depth of your specifications. The types of materials we can prepare and cover is:
- Reinforced concrete
- Precast concrete
- Asphalt
- Brick
- Cinder block
- Other structural materials
Other projects where concrete drilling and coring services are used include:
- Making holes for anchor bolts or lifting bars
- Making holes for explosive charges in preparation for demolition
- Drilling core for rock structure analysis
- Concrete demolition and removal
It’s always impressive to see a large piece of concrete coming down, but it doesn’t happen without careful planning and skill. The diamond cutting and drilling technology we use gives us incredible speed, efficiency, and accuracy in site preparation. To demolish. The traditional effects of this technology have many advantages over reducing (or eliminating) traffic congestion and allow us to operate in more challenging and limited areas. If your demolition requires ‘low vibration’ or ‘no vibration,’ we can do it too! After demolition, we can also remove and clean the debris. Removal, after all, is as much a part of the job as demolition. When it comes to concrete,Ikan Crack Cutting and Coring has more than 20 years of experience in demolition and removal. Let’s use our expertise to work on your next project.
- Demolition of concrete
- Rock breaking and cracking
- Rock anchor installation
- Control pairs
- Window and door openings
- Plumbing, trenching, and removal
- Become rented
Concrete contractors who’re required to carry out concrete core electricity assessments have a few alternatives when it comes to core drilling. They can lease a checking out lab or concrete sawing and drilling company to drill the cores, or they could choose to drill the cores themselves. Regardless of who drills the cores, ensure you’ve got a written center test application that considers the right region in a wall or slab from which to extract cores and how to take care of cores once you do away with them from the concrete.
Concrete Cutting and Core Drilling
Here are some guidelines for contractors who choose to drill the cores themselves.
Choosing a drill. Whether you buy or rent a drill, there are a few options to don’t forget. Typically, you’ll use a handheld middle drill for holes up to 3 inches in diameter, says Scott Saunders, C.S. Unitec. Since a minimal middle length for middle strength testing is three.7 inches in diameter, you may need to apply a drill stand or rig-hooked-up unit. If you’re shopping a unit, you could want to select a version that offers the flexibility to perform other projects, like drilling dowel holes or holes for plumbing or electric paintings. There are numerous sizes of handheld gadgets, rig-mounted devices, and middleman devices that may be used both hand-held or with a drill stand.
Power. Core drill automobiles come in 3 energy alternatives: hydraulic, air, and electric. Your Jobsite strength availability and working surroundings will dictate the electricity choice you pick out. Some devices also can help you choose the right speed for your hollow length and concrete hardness.
Stand attachment. When drilling cores in slabs with a particularly flat surface, you may use a vacuum stand, which attaches to the ground with suction energy and does not require anchor holes. When drilling cores in a wall you will need to comfortable the stand to the wall with anchors. Saunders additionally recommends a protection chain with drill stands as a precaution in the occasion of a slip.
Choosing a diamond bit. Consider concrete psi and combination hardness whilst deciding on the proper diamond core bit. “The diamond core bit will want to correspond to the material you are drilling,” offers Saunders. “Use a softer diamond bond for harder materials and a tougher diamond bond for softer concrete.”
Depth. Most of your fashionable concrete center checking out samples can be drilled with a 1-foot bit. If you want to drill a middle deeper than that, you could utilize barrel bits, which can be basically bit extensions that assist you to drill deeper than the slicing bit itself.
Read “How to Choose a High-Quality Diamond Core Drill” for a deeper take a look at coring equipment alternatives.
How does concrete coring work?
Concrete coring makes use of a diamond reducing drill to reduce an ideal spherical hollow in any concrete shape – in a floor, wall, or ceiling. The method is low-noise, dust-loose, and non-percussive, which means it’s miles the maximum famous preference for cutting.
Concrete coring makes use of a drilling tool made with a diamond cutting kit connected to a metal tube to pierce concrete. Holes can be drilled at any perspective – whether or not vertical or horizontal. We can use electric or hydraulic rigs for drilling in touchy locations or confined spaces.
As the rig drills, we cool the cutter with water to lessen friction. When the cutting system is complete, we remove the slug, leaving an excellent hollow without beauty damage or aftercare requirement. Read more
